How Long Does It Take to Charge a Car Battery?

How Long Does It Take to Charge a Car Battery? It’s a question that’s been on all of our minds at one time or another. Turns out, the answer isn’t as clear-cut as you might think. Depending on the type of battery and charger you use, it can take anywhere from two to 12 hours to fully charge a car battery. So, what’s the best way to go about charging your car battery efficiently and safely? Keep reading for tips.

What is a Car Battery and Why Does It Need to be Charged?

A car battery is a lead-acid battery that provides the electrical current necessary to start an engine. It is also known as a SLI (starting, lighting, and ignition) battery. A typical car battery has six cells, each of which produces two volts for a total of 12 volts. The battery is connected to the starter, which uses the electrical current to turn the engine over and start it.

The car’s alternator keeps the battery charged while the engine is running. If the battery voltage gets too low, the engine will not start. When a car is driven, the alternator charges the battery and power is supplied to all of the car’s electrical systems, including the lights, radio, and other accessories. If any of these accessories are left on when the engine is turned off, they will drain power from the battery and can cause it to go dead.

It is important to keep your car’s battery charged so that it will be able to start your engine when you need it to. You can do this by regularly driving your car or by using a battery charger. If you let your car’s battery run too low, it can damage it and shorten its lifespan.

How Dead is Your Battery?

The average lifespan of a car battery is three to five years. However, batteries can die sooner depending on a number of factors, including extreme weather conditions, frequent short trips, and extended periods of inactivity. If your battery is more than three years old, it’s a good idea to have it tested annually to check its strength. You can usually get this done for free at auto parts stores. If the test shows that your battery is weak, it’s best to replace it before it dies completely.

Otherwise, you run the risk of being stranded with a dead battery. To extend the life of your battery, keep it clean and free of dirt and corrosion. Also, make sure to keep it properly charged by starting your car regularly and taking long drives whenever possible.

How Long Does it Take to Charge a Car Battery?

The amount of time it takes to charge a car battery depends on the type of charger you are using, the size of your battery, and the amount of charge left in it.

Using a standard household outlet, charging a car battery with a full charge may take up to 8 hours. If your battery is dead or almost dead, it may take up to 16 hours.

Using a 12-volt charger will typically charge a car battery in 30 minutes to 1 hour. Again, if your battery is dead or almost dead, it may take longer.

And finally, inductive charging pads will typically charge a car battery in about an hour. However, since this technology is still relatively new and can vary by manufacturer, it’s best to follow the instructions provided with your specific charger for optimal results.

What are the Different Methods of Charging a Car Battery?

There are a few different ways to charge a car battery. One is by using a standard household outlet. Another is by using a 12-volt charger, which is designed specifically for charging car batteries. And finally, some newer cars have the ability to charge their batteries via an inductive charging pad.

Charging a car battery via a standard household outlet is the most common method. To do this, you’ll need to purchase a special charger that plugs into the outlet and connects to the battery. These chargers typically have two settings: “trickle” and “full.” The trickle setting will charge the battery slowly, over the course of several hours, while the full setting will charge it more quickly. It’s important not to leave the charger on the full setting for too long, as it can damage the battery.

The other option for charging a car battery is to use a 12-volt charger. These chargers plug into your cigarette lighter socket and deliver a quick burst of power to the battery. They’re ideal for emergency situations when you need to jump-start your car. Just be sure not to leave the charger plugged in for too long, as it can drain your car’s electrical system.

Some newer cars come with inductive charging pads that allow you to charge your battery wirelessly. To use this type of charger, you simply park your car over the pad and it starts charging automatically. These types of chargers are still relatively new, so it’s important to follow the manufacturer’s instructions for safe and effective use.

Factors that Affect the Charging Time of a Car Battery

Several factors can affect the charging time of a car battery. The most important factor is the type of battery being used. Lead-acid batteries typically take longer to charge than lithium-ion batteries. The size of the battery also plays a role in how long it takes to charge. A larger battery will take longer to charge than a smaller one.

The voltage of the charger can also affect charging times. A higher voltage charger will charge a battery faster than a lower voltage charger. The amperage of the charger is another factor that can influence charging times. A higher amperage charger will charge a battery faster than a lower amperage charger.

Finally, the temperature can also affect how quickly a car battery charges. Cold temperatures can slow down the charging process, while warm temperatures can speed it up.

Which Car Battery Charger is best to Use?

When it comes to choosing a car battery charger, there are a few things you need to take into consideration. First, you need to decide what type of charger you need. There are two main types of chargers: trickle chargers and boost chargers. Trickle chargers are designed to slowly charge a battery over a long period of time, while boost chargers are designed to quickly charge a battery. Second, you need to consider the size of the charger. If you have a small car, you won’t need a large charger.

However, if you have a large car or truck, you’ll need a charger that is able to provide enough power. Finally, you need to consider the price of the charger. Some chargers are more expensive than others, but you should be able to find one that fits your budget. With so many factors to consider, it can be difficult to choose the right car battery charger. However, if you take the time to do your research, you’ll be able to find the perfect charger for your needs.

How Many Amps Is Your Battery?

The size of your battery will dictate how many amps it can hold. A standard car battery, for example, is typically between 40 and 60 amps. This means that it can provide enough power to start a car with a standard engine in about 10 seconds. There are also larger batteries available for vehicles with larger engines or for those that require more power.

These can range from 80 to 200 amps. If you are not sure how many amps your battery can hold, it is best to consult with a professional. They will be able to help you determine the right size for your needs and make sure that you get the most out of your battery.

What is the best Speed to Charge a Car Battery?

The charging speed of a car battery is determined by the voltage and current of the charger. Most car batteries are 12 volts, so the charger must provide at least this much voltage. The current is measured in amps, and the faster the charge, the higher the amps. For a standard car battery, acharge rate of 10 amps is considered fast, while 2 amps is slow. trickle chargers provide even slower charge rates, often around 1 amp. Many newer cars come with built-in chargers that can provide up to 20 amps, making for a much faster charge.

However, it is important to consult your owner’s manual before using a high-amp charger, as some batteries may be damaged by the increased current. Ultimately, the best charging speed for your car battery will depend on the type of battery you have and what kind of charger you are using.

Types of Car Battery Chargers:

There are many different types of car battery chargers available, including manual and automatic models. Manual chargers require you to monitor the charging process manually in order to prevent overcharging, while automatic chargers can detect when a battery is fully charged or if it is experiencing problems and adjust their charge accordingly:

40-amp Chargers:

40-amp chargers are the fastest type of car battery charger, and they’re typically used in commercial settings. They can charge a dead battery in as little as 30 minutes, making them ideal for busy service centers and tow truck companies. However, 40-amp chargers are also significantly more expensive than other types of chargers, and they require special wiring that isn’t always available in home garages. For the average driver, a 40-amp charger is probably more trouble than it’s worth.

Trickle Chargers:

A trickle charger is a car battery charger that is designed to be left connected to a car battery for an extended period of time, in order to prevent the battery from discharging. Trickle chargers are typically used for batteries that are not being used on a regular basis, such as those in seasonal vehicles or classic cars. While most trickle chargers will have an automatic shut-off feature, it is important to carefully monitor the charging process to avoid overcharging the battery.

Smart Chargers:

Car batteries are an essential component of any vehicle, and it is important to keep them charged and in good working condition. There are a few different types of car battery chargers on the market, each with their own advantages and disadvantages.

Smart chargers are one type of charger that is becoming increasingly popular. These chargers automatically shut off when the battery is fully charged, which helps to prevent overcharging and extends the life of the battery. However, smart chargers can be more expensive than other types of chargers and may not be compatible with all types of batteries.

Another option is a standard charger, which must be manually turned off when the battery is fully charged. Standard chargers are typically more affordable than smart chargers, but they require more user supervision. Choosing the right type of charger will depend on various factors, such as the type of battery, budget, and level of user experience.

Determining Charge Duration:

When determining the duration of a car battery charge, there are several factors that need to be taken into consideration. The type and age of the battery will impact how quickly it can be charged, as well as any current problems with the battery or charger:

Using 2 Amps:

One of the key considerations when choosing a battery for a particular application is its charge duration. This is the amount of time that the battery can sustain a specific discharge rate before it reaches its end-voltage. For example, a battery with a 2-hour charge duration can deliver 1 amp for 2 hours before reaching its end-voltage. The following formula can be used to calculate the charge duration of a battery:

Charge Duration (in hours) = Capacity (in Ah) / Discharge Rate (in A)

For example, if you have a battery with a capacity of 100 Ah and you want to determine how long it will last at a discharge rate of 2 A, you would use the following equation:

Charge Duration (in hours) = 100 Ah / 2 A = 50 hours

This means that the battery would last for 50 hours before needing to be recharged. It is important to note that the capacity of a battery declines as the discharge rate increases. This means that a battery with a 2-hour charge duration at 1 A may only have a 1-hour charge duration at 2 A. When choosing a battery for an application, it is important to consider both the capacity and the discharge rate to ensure that the battery will be able to meet your needs.

Using 4 Amps:

One of the most important aspects of battery care is knowing how to determine charge duration. Using 4 amps, the average battery will take about 8 hours to fully charge. In order to prolong the life of your battery, it is important to not overcharge it. Once the 8 hours have elapsed, the charger should be removed from the battery immediately. If you are unsure of the charge level, it is always better to err on the side of caution and remove the charger sooner rather than later. Allowing a battery to overcharge can cause damage and shorten its lifespan. With a little bit of care, you can keep your battery running strong for years to come.

Using 10 Amps:

In order to determine charge duration, one must first understand the relationship between charge rate and discharge rate. The faster the charge rate, the shorter the discharge duration will be. For example, if a battery is charged at 10 amps, it will take half as long to discharge as if it were charged at 5 amps. This is because the 10 amp charge provides twice as much power as the 5 amp charge. In order to calculate discharge duration, simply divide the battery’s capacity by the charge rate.

For example, a 100 amp-hour battery that is charged at 10 amps will have a discharge duration of 10 hours. This can be extremely useful when trying to determine how long a device can be used on a given charge. Additionally, it is important to note that temperature also affects discharge duration. As temperature decreases, discharge duration increases. Therefore, in order to get the most accurate estimate of discharge duration, it is necessary to factor in both temperature and charge rate.

Using 12 Amps:

There are a few things to consider when determining charge duration for your battery. The first is the amp rating of the battery. This will tell you how many amps can be delivered safely to the battery. For example, if you have a 12 amp hour battery, that means it can deliver 1 amp for 12 hours, or 2 amps for 6 hours, etc. Another factor to consider is the discharge rate of the battery. This is the rate at which the battery will lose its charge when not in use.

Most batteries have a discharge rate of around 3-5% per month. Finally, you’ll want to consider how often you’ll be using the battery. If you’ll be using it regularly, you won’t need to worry as much about discharge rate since the battery will constantly be recharging.

However, if you only plan on using the battery occasionally, you’ll want to make sure to account for discharge rate in your calculations. By taking all of these factors into consideration, you can accurately determine how long your battery will last before needing to be recharged.

Using 50 Amps:

The most important factor in determining charge duration is the amp rating of the battery. A 50 amp battery will provide enough power to run most appliances for a sustained period of time, but it is important to check the specific ratings of your appliances to be sure. For example, a typical refrigerator may use only 30 amps, while a hair dryer may use up to 60 amps.You can find the amp rating of your appliances by checking the label or owner’s manual.

Once you know the amp rating of your appliances, you can calculate how long they will last on a 50 amp battery. For example, if you have a refrigerator that uses 30 amps and you want to run it for 10 hours, you would need 300 amp-hours of power.

This means that you could either use a 300 amp-hour battery or two 150 amp-hour batteries connected in parallel. Keep in mind that running multiple appliances at the same time will decrease the total amount of time that each appliance will run for.

Charging at 50 Amps is Fast, but stay Safe!

Remember to always use a battery charger designed specifically for your battery type, and never leave charging batteries unattended. With proper care, however, you can keep your 50 amp battery running strong for years to come.​

If the Battery won’t hold a Charge, it’s time to Replace it

This can be a costly and time-consuming process, so it’s important to make sure that your battery is in good working condition before buying a replacement. The first step is to test the current draw of your battery, which will tell you how much power it’s able to deliver. You can do this by plugging in an appliance and measuring how long it takes for the battery to drain. If your battery is draining too quickly, then you need a new one. Likewise, if your battery will not hold a charge, it’s time to replace it.

Pros and Cons of Trickle Charging

Advantages:

First, it is a very simple and inexpensive way to keep a battery charged. Second, it is much safer than other methods of charging, such as fast charging, which can cause fires or explosions if done incorrectly. Finally, trickle charging can extend the life of a battery by preventing sulfation, a condition that occurs when lead-acid batteries are allowed to discharge too low and can damage the battery.

Disadvantages:

First, it is a slower process than other methods of charging and can take several hours or even days to fully charge a battery. Second, if the trickle charger is left attached to the battery for too long, it can overcharge the battery, causing damage.

Finally, trickle chargers are not well suited for applications where a battery needs to be quickly recharged, such as after starting a car with a dead battery. For these applications, another type of charger, such as a boost charger, would be more appropriate.

Tips for Charging Your Car Battery

Here are a few tips to help you do just that:

1. Check the battery regularly. A visual inspection can tell you a lot about the health of your battery. Look for cracks, leaks, or any other damage. If you see anything unusual, take your car to a mechanic to have the battery checked out.

2. Keep it clean. Dirt and grime can build up on the battery terminals and prevent proper charging. Use a brush or cloth to clean the terminals regularly.

3. Be careful what you connect to your battery. Some devices, like cell phone chargers, can draw too much power from the battery and cause damage. Make sure any devices you connect to your car’s battery are designed for automotive use only.

4. Don’t let it discharge too much. Discharging your car battery all the way can shorten its lifespan significantly. Try to keep it above 50% charged whenever possible.

5. Store it properly when not in use. If you’re going to be storing your car for an extended period of time, disconnect the battery and store it in a cool, dry place away from metal objects (which can cause corrosion).

How Much Driving to Fully Charge a Battery?

When you’re trying to determine how much driving to fully charge a battery, there are several things to keep in mind. The first is that every battery is different, and therefore will have different charging requirements. You’ll need to consult your owner’s manual or the manufacturer’s website to get specific information about your battery. In general, however, it’s generally recommended that you drive for at least 30 minutes at a time in order to fully charge a battery.

This will ensure that the alternator has a chance to put out enough power to fully charge the battery. Additionally, it’s important to make sure that you’re not regularly draining your battery by leaving lights or other electrical accessories on when the car is off. If you do this regularly, it will shorten the amount of time that your battery will be able to hold a full charge.

Charging Current vs. Battery Capacity:

The relationship between charging current and battery capacity is an important one to understand when it comes to prolonging the life of your batteries. In general, it is best to keep the charging current as low as possible while still achieving the desired capacity. High charge currents can shorten battery life by causing extensive damage to the battery chemistry. Conversely, low charge currents can result in less than full capacity and may require extended charge times.

It is therefore important to find a balance that meets your needs without compromising the longevity of your batteries. With proper care and maintenance, following these guidelines will help ensure that your batteries provide optimum performance for years to come.

Charging The Car Battery While Driving:

One of the most common questions we get asked is whether it’s possible to charge a car battery while driving. The short answer is yes, but the long answer is a bit more complicated. In order to understand how charging a car battery while driving works, it’s first important to have a basic understanding of how car batteries work. Car batteries are made up of two lead plates that are submerged in an electrolyte solution. When the engine is running, the alternator provides power to the battery, causing a chemical reaction that produces electrons. These electrons flow from the negative lead plate to the positive lead plate, creating an electric current.

This current can then be used to power the car’s electrical systems. So, when you ask if it’s possible to charge a car battery while driving, what you’re really asking is if it’s possible to reverse this process and cause the electrons to flow from the positive lead plate to the negative lead plate. And the answer to that question is yes, it is possible to charge a car battery while driving.

Is it Better to Charge the Battery or Jump Start the Car?

If your car’s battery is dead, you have two options for getting it up and running again. You can either charge the battery or jump start the car. Both methods have their pros and cons, so it’s important to consider your situation before making a decision. If you have access to a power outlet and some time, charging the battery is usually the best option. It’s cheap, easy, and doesn’t require any special equipment.

However, it can take several hours for the battery to reach full charge, so if you’re in a hurry, jump starting may be your best bet. Jump starting is faster than charging, but it can be harder to do if you’re not familiar with the process. Additionally, jump starting can be dangerous if not done properly, so it’s important to exercise caution. In the end, whether you charge or jump start your car’s battery is up to you. Just make sure to weigh your options carefully before making a decision.

How long does a Car have to run to Charge a Dead Battery?

The amount of time required to charge a dead car battery depends on a few factors, including the type of battery, the charger being used, and the size of the battery. Most standard car batteries are 12 volt lead-acid batteries, and they can be charged using a standard household outlet. For a typical 12 volt battery, it will take about 10 hours to charge using a standard household charger. However, if the battery is completely drained, it may take up to 24 hours to fully charge.

Charging times will also vary depending on the type of charger being used. A faster charger will be able to charge the battery in a shorter amount of time than a slower charger. Finally, the size of the battery will also affect charging times. A larger battery will take longer to charge than a smaller battery. In general, it is best to consult your car’s owner manual for specific information on charging times for your particular vehicle.

Charging Almost Completely Discharged Car Battery:

It is not advisable to allow your car battery to discharge completely. A car battery is typically considered “dead” when it falls below 12 volts. At this voltage, the battery is unable to start most vehicles. Moreover, it will take a much longer time to recharge a completely discharged battery than one that has only been partially discharged. However, if you do find yourself in this situation, there are a few things you can do to get your battery back up to snuff.

First, try jump starting your vehicle using another car with a working battery. If this isn’t possible, you can use a portable jump starter or even a set of jumper cables and another vehicle. Once your vehicle is running, let it idle for at least 15 minutes to help recharge the battery.

If you have time, you can also drive around for at least 30 minutes to give the battery a boost. Just be sure to avoid extended periods of idling as this can actually drain the battery further. Finally, if your battery is more than three years old or if it’s showing signs of weakness (e.g., takes longer to start the car), it’s probably time for a replacement.

Maintenance and Care for Your Car Battery

Your car battery is an essential component of your vehicle, and it is important to take care of it in order to ensure that it lasts as long as possible. There are a few things that you can do to maintain your car battery and keep it in good condition.

First, make sure to keep the battery clean. Dirt and grime can build up on the battery terminals and cause corrosion, which can lead to problems with the battery itself. You can clean the terminals by using a solution of water and baking soda, or you can buy a commercial terminal cleaner at your local auto parts store.

Second, check the level of electrolyte in the battery regularly. The electrolyte is what allows the current to flow through the battery, and if it gets too low, it can damage the battery. You can check the level by removing the caps from the top of the battery and looking inside. If it looks like the level is low, you can add distilled water to bring it back up.

Third, make sure that you charging system is working properly. A faulty charging system can cause problems with your battery, so it’s important to have it checked regularly by a mechanic.

These are just a few tips for taking care of your car battery. By following these simple steps, you can help extend the life of your battery and avoid expensive repairs down the road.

FAQs

What Causes a Battery to go Flat?

Batteries are an essential part of our lives, providing power to everything from cars and laptops to phones and watches. But what causes them to go flat? Most batteries are made up of two parts: the anode and the cathode. The anode is made up of a negatively charged material, while the cathode is made up of a positively charged material. When the two materials are placed together in an electrolyte, they create a chemical reaction that produces electrons.

These electrons flow from the anode to the cathode, creating a current that can be used to power electronic devices. However, over time, the anode and cathode materials start to break down, reducing the amount of current that can be produced. This is what causes a battery to go flat.

Fortunately, there are ways to prolong the life of a battery, such as using energy-efficient devices and avoiding extreme temperatures. By understanding what causes batteries to go flat, we can help to extend their lifespan and keep our electronic devices powered up for longer.

What is the best way to charge a car battery?

There is no one-size-fits-all answer to this question, as different battery types and applications require different charging methods. Typically, however, the best way to charge a car battery is with a slow or trickle charger that is specifically designed for use with lead-acid batteries.

Other types of chargers, such as fast chargers or boost chargers, can cause damage or reduce the life of your car battery if used incorrectly. Always consult the manufacturer’s recommendations when choosing a charger for your battery.​

How often should you charge your car battery?

The frequency with which you need to charge your car battery will depend on a number of factors, including the age and condition of the battery, how often it is used, the weather conditions in which it is kept, and more. Generally speaking, however, most car batteries should be charged at least once per month to prevent sulfation or loss of power.

Some car batteries may need to be charged more often, and you should always consult the manufacturer’s recommendations for specific instructions on how and when to charge your battery.​

When should I charge a car battery with a charger?

There is no definitive answer to this question, as there are a number of different factors that can influence when and how you should charge your car battery. Generally speaking, however, it is best to charge a car battery after it has been used or exposed to extreme weather conditions for an extended period of time.

In particular, if you notice that your car battery is not holding a charge, it may be time to use a car battery charger in order to bring it back up to full power. Always consult the manufacturer’s recommendations for specific instructions on how and when to charge your battery.​

How long is it safe to charge a car battery?

There is no definitive answer to this question, as different types and models of car batteries will have varying maximum charge times. In general, however, most car batteries can be safely charged for up to 12 hours at a time without causing damage or reducing the battery’s overall life. It is important to only use chargers that are specifically designed for use with your car battery, as using the wrong charger can lead to overcharging or even fires and explosions.​

How long can a recharged car battery last?

There is no definitive answer to this question, as the lifespan of a car battery will depend on a number of factors, including its age and condition, how it is used, the weather conditions in which it is stored, and more. In general, however, most car batteries can offer several years of reliable service if they are properly charged and maintained.

To help ensure that your car battery lasts as long as possible, it is important to take good care of your vehicle and consult the manufacturer’s recommendations for specific instructions on how and when to charge or replace your car battery.​

Can you charge a car battery if it’s completely dead?

A car battery can be charged if it is completely dead, but it may require special equipment. For example, a booster pack can be used to jump-start the engine, which can then be used to charge the battery. If the battery is too damaged, however, it may need to be replaced. Specialty tools, such as a voltmeter, may also be required to properly charge a car battery.

In short, while it is possible to charge a dead battery, it is not always simple or straightforward. Depending on the situation, calling a tow truck or taking the car to a mechanic may be the best option.

How do you keep a car battery charged when not in use?

There are a number of different strategies you can use to help keep your car battery charged when it is not in use. One option is to connect the battery to a car charger or maintainer, which allows the battery to be trickle-charged over time. You can also use high-quality batteries that are designed for long-term storage or keep the battery in a cool, dry place where it will not be exposed to extreme temperatures.

Additionally, some car batteries may include an automatic charging system that maintains the charge level while the car is not in use. Ultimately, there are many different factors that can affect how long a car battery will hold its charge when not in use, so it is important to consult the manufacturer’s recommendations for specific instructions on how and when to charge your car battery.​

What temperature kills a car battery?

A car battery typically contains lead acid, which is highly sensitive to temperature. In general, lead acid performs best at temperatures between 20 and 30 degrees Celsius. However, it can still function at lower temperatures, as long as the battery is not frozen. Once the temperature drops below freezing, the lead acid crystals begin to expand, damaging the battery and preventing it from holding a charge.

As a result, a car battery will usually die if the temperature falls below freezing for an extended period of time. However, it is worth noting that some newer batteries are designed to withstand colder temperatures. So, if you live in a cold climate, it may be worth investing in a more durable battery.

Does weather affect car batteries?

Most car batteries are made of lead and acid, which can be affected by extreme changes in temperature. In cold weather, the battery’s chemical reaction slows down, making it harder to start the engine. In hot weather, the opposite happens – the battery’s chemicals become more active, which can shorten its lifespan. Additionally, hot weather can cause the battery’s casing to crack and leak, damaging the surrounding area.

As a result, it’s important to be aware of how weather can affect your car battery and take steps to protect it from extreme conditions. For example, in cold weather, you can use a battery blanket or warm up the engine before starting it. In hot weather, you should keep the battery cool by avoiding direct sunlight and making sure there’s adequate ventilation around it.

What causes a car battery to go bad?

Car batteries can go bad for a number of different reasons, including old age, exposure to extreme temperatures and conditions, frequent use, or improper charging. Other factors that may affect the health of your car battery include exposure to moisture or corrosion, physical damage or impact, and chemical changes in the battery fluid.

If you are concerned about the condition of your car battery, it is best to consult a professional mechanic who can perform testing and diagnostics to help identify any underlying issues. In the meantime, you can take steps to keep your car battery charged, such as using high-quality batteries that are designed for long-term storage or regularly maintaining your battery with a battery charger or maintainer.

Conclusion

Car batteries die for a variety of reasons, but most often it’s because the car isn’t being driven regularly enough to keep the battery charged. However, there are several ways to recharge a car battery, depending on what type of charger you have available. We hope this article has helped answer some of your questions about car batteries and charging them. If you have any further questions or need help finding the right car battery charger for your needs, please don’t hesitate to contact us.

References: How to Charge a Dead Car Battery